TPE Flame Retardant Masterbatch FR-TPE500

IntroductionFR-TPE500 consists of environment friendly flame retardant system of bromine and antimony,Website:http://www.hx-flameretardant.com, developed for TPE (thermoplastic elastomer). Mainly used in insulated cable (TPE, TPV, TPR or TPU), low dosage and high performance. FR-TPE500 can pass UL1581VW-1 test, and it is not limited by the Directive 2002/95/EC of the European Parliament and of the Council on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment. Advantage: good gloss, non-blooming, good water resistance, excellent transference resistance, good electric performance.IndexItemIndexAppearanceWhite GranularContent %>70Density g/cm32.13Melt Index g/min,220℃5kg3.4Water Content %≤0.1Decomposition Temp ℃≥300Extrusion Process (Twin Screw Extruder)Packing/Storage25KG/bag: Transported as a common chemical and stored in dry and cool place, avoid direct sunlight.Appendix：Application Examples1-1.FormulaMaterialsFormulaTPE90FR-TPE500101-2.Technical DataPropertiesTest MethodsUnitTPEraw materialFormulaDensityASTM D-792g/cm31.101.15HardnessASTM D-2240Shore A35Melt Index(200℃/2.16KG)ASTM D-955g/10min87-Tensile StrengthASTM D-638MPa8.212Elongation At BreakASTM D-638%757.2820.2Retardancy 0.1mmUL 1581--VW-1VW-11-3. Injection Process:Drying condition: Drying at 100 deg C to 2-3 hours by desiccant dryers.Extruder: use general extruder, screw L/D 25:1, compression ratio 3.Injection machine temperature setup:Heating ZoneStep1Step2Step3NozzleTemperature175185190185Note:1.All the application typical data above are just for reference, not an official warranty certificate.2. Provide different design solutions according to requirement of customers.